Convolutional Neural Network Classifier Research Articles

Web-based diagnostic platform for microorganism-induced deterioration on paper-based cultural relics with iterative training from human feedback

PurposePaper-based artifacts hold significant cultural and social values. However, paper is intrinsically fragile to microorganisms, such as mold, due to its cellulose composition, which can serve as a microorganisms’ nutrient source. Mold not only can damage papers’ structural integrity and pose significant challenges to conservation works but also may subject individuals attending the contaminated artifacts to health risks. Current approaches for strain identification usually require extensive training, prolonged time for analysis, expensive operation costs, and higher risks of secondary damage due to sampling. Thus, in current conservation practices with mold-contaminated artifacts, little pre-screening or strain identification was performed before mold removal, and the cleaning techniques are usually broad-spectrum rather than strain-specific. With deep learning showing promising applications across various domains, this study investigated the feasibility of using a convolutional neural network (CNN) for fast in-situ recognition and classification of mold on paper.MethodsMolds were first non-invasively sampled from ancient Xuan Paper-based Chinese books from the Qing and Ming dynasties. Strains were identified using molecular biology methods and the four most prevalent strains were inoculated on Xuan paper to create mockups for image collection. Microscopic images of the molds as well as their stains situated on paper were collected using a compound microscope and commercial microscope lens for cell phone cameras, which were then used for training CNN models with a transfer learning scheme to perform the classification of mold. To enable involvement and contribution from the research community, a web interface that actuates the process while providing interactive features for users to learn about the information of the classified strain was constructed. Moreover, a feedback functionality in the web interface was embedded for catching potential classification errors, adding additional training images, or introducing new strains, all to refine the generalizability and robustness of the model.Results & ConclusionIn the study, we have constructed a suite of high-confidence classification CNN models for the diagnostic process for mold contamination in conservation. At the same time, a web interface was constructed that allows recurrently refining the model with human feedback through engaging the research community. Overall, the proposed framework opens new avenues for effective and timely identification of mold, thus enabling proactive and targeted mold remediation strategies in conservation.

ARGNet: using deep neural networks for robust identification and classification of antibiotic resistance genes from sequences

BackgroundEmergence of antibiotic resistance in bacteria is an important threat to global health. Antibiotic resistance genes (ARGs) are some of the key components to define bacterial resistance and their spread in different environments. Identification of ARGs, particularly from high-throughput sequencing data of the specimens, is the state-of-the-art method for comprehensively monitoring their spread and evolution. Current computational methods to identify ARGs mainly rely on alignment-based sequence similarities with known ARGs. Such approaches are limited by choice of reference databases and may potentially miss novel ARGs. The similarity thresholds are usually simple and could not accommodate variations across different gene families and regions. It is also difficult to scale up when sequence data are increasing.ResultsIn this study, we developed ARGNet, a deep neural network that incorporates an unsupervised learning autoencoder model to identify ARGs and a multiclass classification convolutional neural network to classify ARGs that do not depend on sequence alignment. This approach enables a more efficient discovery of both known and novel ARGs. ARGNet accepts both amino acid and nucleotide sequences of variable lengths, from partial (30–50 aa; 100–150 nt) sequences to full-length protein or genes, allowing its application in both target sequencing and metagenomic sequencing. Our performance evaluation showed that ARGNet outperformed other deep learning models including DeepARG and HMD-ARG in most of the application scenarios especially quasi-negative test and the analysis of prediction consistency with phylogenetic tree. ARGNet has a reduced inference runtime by up to 57% relative to DeepARG.ConclusionsARGNet is flexible, efficient, and accurate at predicting a broad range of ARGs from the sequencing data. ARGNet is freely available at https://github.com/id-bioinfo/ARGNet, with an online service provided at https://ARGNet.hku.hk.7nR91jX7ySRMRPZrE5tsTyVideo

A Method of Skin Disease Detection Using Image Processing and Machine Learning

Skin conditions are prevalent health issues globally. The dangers posed by these infections are unseen, leading to physical discomfort and mental anguish. In severe cases, skin diseases can even progress to skin cancer. Consequently, the identification of skin diseases from clinical images remains a significant challenge in medical image analysis. Furthermore, manual diagnosis by medical professionals is time-consuming and subjective. Therefore, there is a need for automated skin disease prediction to expedite treatment planning for both patients and dermatologists. These studies presents a digital hair removal method and de-blurs or denoise the images. To extract essential patterns from the skin imagesand statistical features techniques are utilized. Two efficient machine learning algorithms, namely Support Vector Machine (SVM), and Convolutional Neural Network (CNN) classifiers, are employed with the extracted features to accurately classify skin images as melanoma (MEL), melanocytic nevus (NV), basal cell carcinoma (BCC), actinic keratosis (AK), benign keratosis (BKL), dermatofibroma (DF), vascular lesion (VASC), and Squamous cell carcinoma (SCC). The models are validated using the ISIC 2019 challenge and HAM10000 datasets, with SVM demonstrating slightly superior performance compared to the other classifiers. Furthermore, a comparison with state-of-the-art methods is conducted to evaluate the effectiveness of the proposed approach.

Hydrogel-based flexible degradable triboelectric nanogenerators for human activity recognition

The development of Internet of Things (IoT) and Artificial Intelligence (AI) technologies has led to an increased demand for wearable electronic devices that can be used in a variety of contexts. Hydrogel sensors have been regarded as an ideal material for the fabrication of multifunctional flexible wearable devices. However, it is difficult to create hydrogel sensors with ideal electrical and mechanical properties. In this study, a conductive hydrogel prepared by a simple method has been introduced. The hydrogel was immersed in a binary solvent of glycerol, water and sodium citrate to form a transparent, long-term stable and highly conductive gelatin-NaCl organohydrogel (GNOH). A stretchable and durable gelatin Ecoflex triboelectric nanogenerator (GE-TENG) was created by combining an organic hydrogel with Ecoflex elastomer. It has high electrical and mechanical performance, with an open-circuit voltage of 142 V, current of 3.8 μA, power output of 19.36 μW and response time of 85 ms. Moreover, the single-electrode mode of the GE-TENG provides high electrical output for powering portable electronic devices and can capture biomechanical energy in temperatures as low as −20 °C. As a result of these capabilities, GE-TENG can effectively identify human movements with precision and transmit signals wirelessly, thereby broadening its potential applications. The GE-TENG-based self-powered intelligent sensing system (GSIS) for human-computer interaction demonstrates a wearable intelligent system for controlling the movement of a tank model and a manipulator by integrating the signal acquisition, signal processing and signal output components. The system achieves 100% signal recognition accuracy when combined with covariance matrix feature analysis and Convolutional Neural Network classification algorithms. This research demonstrates the potential of wearable hydrogel-based electronic devices for monitoring human motion, harvesting biomechanical energy and human-computer interaction.

Exploration of Speech and Music Information for Movie Genre Classification

Movie genre prediction from trailers is mostly attempted in a multi-modal manner. However, the characteristics of movie trailer audio indicate that this modality alone might be highly effective in genre prediction. Movie trailer audio predominantly consists of speech and music signals in isolation or overlapping conditions. This work hypothesizes that the genre labels of movie trailers might relate to the composition of their audio component. In this regard, speech-music confidence sequences for the trailer audio are used as a feature. In addition, two other features previously proposed for discriminating speech-music are also adopted in the current task. This work proposes a time and channel Attention Convolutional Neural Network (ACNN) classifier for the genre classification task. The convolutional layers in ACNN learn the spatial relationships in the input features. The time and channel attention layers learn to focus on crucial time steps and CNN kernel outputs, respectively. The Moviescope dataset is used to perform the experiments, and two audio-based baseline methods are employed to benchmark this work. The proposed feature set with the ACNN classifier improves the genre classification performance over the baselines. Moreover, decent generalization performance is obtained for genre prediction of movies with different cultural influences (EmoGDB).

Quantum Fourier networks for solving parametric PDEs

Many real-world problems, like modelling environment dynamics, physical processes, time series etc involve solving partial differential equations (PDEs) parameterised by problem-specific conditions. Recently, a deep learning architecture called Fourier neural operator (FNO) proved to be capable of learning solutions of given PDE families for any initial conditions as input. However, it results in a time complexity linear in the number of evaluations of the PDEs while testing. Given the advancements in quantum hardware and the recent results in quantum machine learning methods, we exploit the running efficiency offered by these and propose quantum algorithms inspired by the classical FNO, which result in time complexity logarithmic in the number of evaluations and are expected to be substantially faster than their classical counterpart. At their core, we use the unary encoding paradigm and orthogonal quantum layers and introduce a new quantum Fourier transform in the unary basis. We propose three different quantum circuits to perform a quantum FNO. The proposals differ in their depth and their similarity to the classical FNO. We also benchmark our proposed algorithms on three PDE families, namely Burgers’ equation, Darcy’s flow equation and the Navier–Stokes equation. The results show that our quantum methods are comparable in performance to the classical FNO. We also perform an analysis on small-scale image classification tasks where our proposed algorithms are at par with the performance of classical convolutional neural networks, proving their applicability to other domains as well.

ML3CNet: Non-local means-assisted automatic framework for lung cancer subtypes classification using histopathological images

Background and objective:Lung cancer (LC) has a high fatality rate that continuously affects human lives all over the world. Early detection of LC prolongs human life and helps to prevent the disease. Histopathological inspection is a common method to diagnose LC. Visual inspection of histopathological diagnosis necessitates more inspection time, and the decision depends on the subjective perception of clinicians. Usually, machine learning techniques mostly depend on traditional feature extraction which is labor-intensive and may not be appropriate for enormous data. In this work, a convolutional neural network (CNN)-based architecture is proposed for the more effective classification of lung tissue subtypes using histopathological images. Methods:Authors have utilized the first-time nonlocal mean (NLM) filter to suppress the effect of noise from histopathological images. NLM filter efficiently eliminated noise while preserving the edges of images. Then, the obtained denoised images are given as input to the proposed multi-headed lung cancer classification convolutional neural network (ML3CNet). Furthermore, the model quantization technique is utilized to reduce the size of the proposed model for the storage of the data. Reduction in model size requires less memory and speeds up data processing. Results:The effectiveness of the proposed model is compared with the other existing state-of-the-art methods. The proposed ML3CNet achieved an average classification accuracy of 99.72%, sensitivity of 99.66%, precision of 99.64%, specificity of 99.84%, F-1 score of 0.9965, and area under the curve of 0.9978. The quantized accuracy of 98.92% is attained by the proposed model. To validate the applicability of the proposed ML3CNet, it has also been tested on the colon cancer dataset. Conclusion:The findings reveal that the proposed approach can be beneficial to automatically classify LC subtypes that might assist healthcare workers in making decisions more precisely. The proposed model can be implemented on the hardware using Raspberry Pi for practical realization.

Frequency Domain Channel-Wise Attack to CNN Classifiers in Motor Imagery Brain-Computer Interfaces.

Convolutional neural network (CNN), a classical structure in deep learning, has been commonly deployed in the motor imagery brain-computer interface (MIBCI). Many methods have been proposed to evaluate the vulnerability of such CNN models, primarily by attacking them using direct temporal perturbations. In this work, we propose a novel attacking approach based on perturbations in the frequency domain instead. For a given natural MI trial in the frequency domain, the proposed approach, called frequency domain channel-wise attack (FDCA), generates perturbations at each channel one after another to fool the CNN classifiers. The advances of this strategy are two-fold. First, instead of focusing on the temporal domain, perturbations are generated in the frequency domain where discriminative patterns can be extracted for motor imagery (MI) classification tasks. Second, the perturbing optimization is performed based on differential evolution algorithm in a black-box scenario where detailed model knowledge is not required. Experimental results demonstrate the effectiveness of the proposed FDCA which achieves a significantly higher success rate than the baselines and existing methods in attacking three major CNN classifiers on four public MI benchmarks. Perturbations generated in the frequency domain yield highly competitive results in attacking MIBCI deployed by CNN models even in a black-box setting, where the model information is well-protected. To our best knowledge, existing MIBCI attack approaches are all gradient-based methods and require details about the victim model, e.g., the parameters and objective function. We provide a more flexible strategy that does not require model details but still produces an effective attack outcome.

DeepCOVID: a deep learning approach for accurate COVID-19 detection in point-of-care lung ultrasound

Sickness still continued to spread through several countries when it first appeared in China. The number of COVID-19 cases is rising daily worldwide, posing a severe threat to the government and the populace. As a result of the virus’s rapid spread, doctors are having trouble recognizing positive cases. It is obvious that computer-based diagnosis must be developed to get results at a reasonable cost. The classic convolutional neural network (CNN) is used for this, utilizing the CT dataset, and the upgraded CNN model is used with the lung ultrasound (LUS) dataset. The CT and LUS COVID imaging datasets are compared in the model. The accuracy of both deep learning models is higher. We customized ResNet50, a pre-trained deep learning architecture, for a web application paradigm. First, we suggest a method for normalizing data that addresses its variability because it is collected in hospitals using various CT scanners and ultrasound machines. Second, we identify COVID-19 patients using U-Net segmentation and classification. The CNN architecture is added for deep learning purposes, and Res-Net 50 offers incredible accuracy.

Machine learning for non-experts: A more accessible and simpler approach to automatic benthic habitat classification

Automating identification of benthic habitats from imagery, with Machine Learning (ML), is necessary to contribute efficiently and effectively to marine spatial planning. A promising method is to adapt pre-trained general convolutional neural networks (CNNs) to a new classification task (transfer learning). However, this is often inaccessible to a non-specialist, requiring large investments in computational resources and time (for user comprehension and model training). In this paper, we demonstrate a simpler transfer learning framework for classifying broad deep-sea benthic habitats. Specifically, we take an ‘off-the-shelf’ CNN (VGG16) and use it to extract features (pixel patterns) from benthic images (without further training). The default outputs of VGG16 are then fed in to a Support Vector Machine (SVM), a classical and simpler method than deep networks. For comparison, we also train the remaining classification layers of VGG16 using stochastic gradient descent. The discriminative power of these approaches is demonstrated on three benthic datasets (574–8353 images) from Norwegian waters; each using a unique imaging platform. Benthic habitats are broadly classified as Soft Substrate (sands, muds), Hard Substrate (gravels, cobbles and boulders) and Reef (Desmophyllum pertusum). We found that the relatively simplicity of the SVM classifier did not compromise performance. Results were competitive with the CNN classifier and consistently high, with test accuracy ranging from 0.87 to 0.95 (average = 0.9 (±0.04)) across datasets, somewhat increasing with dataset size. Impressively, these results were achieved 2.4–5× faster than CNN training and had significantly less dependency on high-specification hardware. Our suggested approach maximises conceptual and practical simplicity, representing a realistic baseline for novice users when approaching benthic habitat classification. This method has wide potential. It allows automated image grouping to aid annotation or further model selection, as well as screening of old-datasets. It is especially suited to offshore scenarios as it can provide quick, albeit crude, insights into habitat presence, allowing adaptation of sampling protocols in near real-time.

Leveraging a realistic synthetic database to learn Shape-from-Shading for estimating the colon depth in colonoscopy images

Colonoscopy is the choice procedure to diagnose, screening, and treat the colon and rectum cancer, from early detection of small precancerous lesions (polyps), to confirmation of malign masses. However, the high variability of the organ appearance and the complex shape of both the colon wall and structures of interest make this exploration difficult. Learned visuospatial and perceptual abilities mitigate technical limitations in clinical practice by proper estimation of the intestinal depth. This work introduces a novel methodology to estimate colon depth maps in single frames from monocular colonoscopy videos. The generated depth map is inferred from the shading variation of the colon wall with respect to the light source, as learned from a realistic synthetic database. Briefly, a classic convolutional neural network architecture is trained from scratch to estimate the depth map, improving sharp depth estimations in haustral folds and polyps by a custom loss function that minimizes the estimation error in edges and curvatures. The network was trained by a custom synthetic colonoscopy database herein constructed and released, composed of 248400 frames (47 videos), with depth annotations at the level of pixels. This collection comprehends 5 subsets of videos with progressively higher levels of visual complexity. Evaluation of the depth estimation with the synthetic database reached a threshold accuracy of 95.65%, and a mean-RMSE of 0.451cm, while a qualitative assessment with a real database showed consistent depth estimations, visually evaluated by the expert gastroenterologist coauthoring this paper. Finally, the method achieved competitive performance with respect to another state-of-the-art method using a public synthetic database and comparable results in a set of images with other five state-of-the-art methods. Additionally, three-dimensional reconstructions demonstrated useful approximations of the gastrointestinal tract geometry. Code for reproducing the reported results and the dataset are available at https://github.com/Cimalab-unal/ColonDepthEstimation.

Quantum-Enhanced Representation Learning: A Quanvolutional Autoencoder Approach against DDoS Threats

Motivated by the growing threat of distributed denial-of-service (DDoS) attacks and the emergence of quantum computing, this study introduces a novel “quanvolutional autoencoder” architecture for learning representations. The architecture leverages the computational advantages of quantum mechanics to improve upon traditional machine learning techniques. Specifically, the quanvolutional autoencoder employs randomized quantum circuits to analyze time-series data from DDoS attacks, offering a robust alternative to classical convolutional neural networks. Experimental results suggest that the quanvolutional autoencoder performs similarly to classical models in visualizing and learning from DDoS hive plots and leads to faster convergence and learning stability. These findings suggest that quantum machine learning holds significant promise for advancing data analysis and visualization in cybersecurity. The study highlights the need for further research in this fast-growing field, particularly for unsupervised anomaly detection.

An Analysis of Convolutional Neutral Network for Image Classification

Abstract: Convolutional Neural Networks (CNNs) have emerged as a powerful tool for image classification tasks, owing to their ability to automatically learn hierarchical representations from raw pixel data. This paper presents a comprehensive analysis of CNNs for image classification, focusing on their architecture, training process, and performance evaluation metrics. The study investigates various CNN architectures, including AlexNet, GoogLeNet, and ResNet, highlighting their respective strengths and weaknesses in different scenarios. Moreover, the paper explores the impact of hyperparameters such as network depth, filter size, and pooling strategies on classification accuracy and computational efficiency. Furthermore, the training process of CNNs, encompassing data preprocessing, augmentation techniques, and optimization algorithms, is scrutinized to elucidate best practices for achieving optimal performance. Additionally, the paper discusses commonly used evaluation metrics such as accuracy, precision, recall, and F1-score, elucidating their interpretation and significance in assessing model performance. Through a systematic review of existing literature and experimental validation, this analysis aims to provide insights into the underlying mechanisms of CNNs for image classification tasks. Finally, the paper outlines future research directions, emphasizing the need for exploring novel architectures, optimizing hyperparameters, and enhancing interpretability and robustness of CNN models. Overall, this study contributes to a deeper understanding of CNNs for image classification and provides valuable guidance for practitioners and researchers in the field.

Wavelet scattering transform and entropy features in fluorescence spectral signal analysis for cervical cancer diagnosis

Cervical cancer is a prevalent malignant tumor within the female reproductive system and is regarded as a prominent cause of female mortality on a global scale. Timely and precise detection of various phases of cervical cancer holds the potential to substantially enhance both the rate of successful treatment and the duration of patient survival. Fluorescence spectroscopy is a highly sensitive method for detecting the biochemical changes that arise during cancer progression. In our study, fluorescence spectral data is collected from a diverse group of 110 subjects. The potential of the scattering transform technique for the purpose of cancer detection is explored. The processed signal undergoes an initial decomposition into scattering coefficients using the wavelet scattering transform (WST). Subsequently, the scattering coefficients are subjected to computation for fuzzy entropy, dispersion entropy, phase entropy, and spectral entropy, for effectively characterizing the fluorescence spectral signals. These combined features generated through the proposed approach are then fed to 1D convolutional neural network (CNN) classifier to classify them into normal, pre-cancerous, and cancerous categories, thereby evaluating the effectiveness of the proposed methodology. We obtained mean classification accuracy of 97% using 5-fold cross-validation. This demonstrates the potential of combining WST and entropic features for analyzing fluorescence spectroscopy signals using 1D CNN classifier that enables early cancer detection in contrast to prevailing diagnostic methods.

Preoperative CECT-Based Multitask Model Predicts Peritoneal Recurrence and Disease-Free Survival in Advanced Ovarian Cancer: A Multicenter Study

ObjectivePeritoneal recurrence is the predominant pattern of recurrence in advanced ovarian cancer (AOC) and portends a dismal prognosis. Accurate prediction of peritoneal recurrence and disease-free survival (DFS) is crucial to identify patients who might benefit from intensive treatment. We aimed to develop a predictive model for peritoneal recurrence and prognosis in AOC. MethodsIn this retrospective multi-institution study of 515 patients, an end-to-end multi-task convolutional neural network (MCNN) comprising a segmentation convolutional neural network (CNN) and a classification CNN was developed and tested using preoperative CT images, and MCNN-score was generated to indicate the peritoneal recurrence and DFS status in patients with AOC. We evaluated the accuracy of the model for automatic segmentation and predict prognosis. ResultsThe MCNN achieved promising segmentation performances with a mean Dice coefficient of 84.3% (range: 78.8%-87.0%). The MCNN was able to predict peritoneal recurrence in the training (AUC 0.87; 95% CI 0.82–0.90), internal test (0.88; 0.85–0.92), and external test set (0.82; 0.78–0.86). Similarly, MCNN demonstrated consistently high accuracy in predicting recurrence, with an AUC of 0.85; 95% CI 0.82–0.88, 0.83; 95% CI 0.80–0.86, and 0.85; 95% CI 0.83–0.88. For patients with a high MCNN-score of recurrence, it was associated with poorer DFS with P<0.0001 and hazard ratios of 0.1964 (95% CI: 0.1439-0.2680), 0.3249 (95% CI: 0.1896-0.5565), and 0.3458 (95% CI: 0.2582-0.4632). ConclusionsThe MCNN approach demonstrated high performance in predicting peritoneal recurrence and DFS in patients with AOC.

A Deep Learning-based System for Automated Plant Disease Severity Detection and Fertilizer Optimization

Abstract: Because food is a basic requirement for all living beings on Earth, agriculture is especially important in our daily life. Agriculture is our main source of food. In addition to plant diseases that impede the growth and quality of food crops, agriculture works to generate food to feed the growing population. We'll look at five plants: bitter gourd, mango tree, spinach, tomato, and hibiscus. This study proposes a CNN-based technique for early plant disease diagnosis. The approach consisted of three steps: image segmentation, feature extraction, and picture pre-processing. The results of these three processes are combined to form a Convolutional Neural Network (CNN) classifier. To research and analyse a plant, an input image of the damaged portions is obtained and compared to the desired dataset. The disease is then anticipated, along with therapeutic treatments. Once the disease has been recognized, the quantity of pesticides, recommended application place, and chemicals themselves will be displayed. It will also identify the nearest location where pesticides are available.

Classification of Image using Convolutional Neural Network (CNN)

Abstract: Computer vision is concerned with the automatic extraction, analysis, and understanding of useful information from a single image or a sequence of images. We have used Convolutional Neural Networks (CNN) in automatic image classification systems. In most cases, we utilize the features from the top layer of the CNN for classification; however, those features may not contain enough useful information to predict an image correctly. In some cases, features from the lower layer carry more discriminative power than those from the top. Therefore, applying features from a specific layer only to classification seems to be a process that does not utilize learned CNN’s potential discriminant power to its full extent. Because of this property we are in need of fusion of features from multiple layers. We want to create a model with multiple layers that will be able to recognize and classify the images. We want to complete our model by using the concepts of Convolutional Neural Network and CIFAR-10 dataset. Moreover, we will show how MatConvNet can be used to implement our model with CPU training as well as less training time. The objective of our work is to learn and practically apply the concepts of Convolutional Neural Network.

Quantum driven deep learning for enhanced diabetic retinopathy detection

Traditional convolutional neural networks (CNNs) have shown potential for recognizing retinopathy caused by diabetes (DR). However, developing quantum computing has the possibility for improved feature representation. We propose a hybrid approach that combines classical CNNs with quantum circuits to capitalize on both classical and quantum information for DR classification. Using the Keras and Qiskit frameworks, our model encodes picture features into quantum states, allowing for richer representations. Through experiments on a collection of retinal pictures, our model displays competitive performance, with excellent reliability and precision in categorizing DR severity levels. This combination of classical and quantum paradigms offers a fresh approach to enhancing DR diagnosis and therapy.

Development of a Method for Estimating the Angle of Lumbar Spine X-ray Images Using Deep Learning with Pseudo X-ray Images Generated from Computed Tomography

Background and Objectives: In lumbar spine radiography, the oblique view is frequently utilized to assess the presence of spondylolysis and the morphology of facet joints. It is crucial to instantly determine whether the oblique angle is appropriate for the evaluation and the necessity of retakes after imaging. This study investigates the feasibility of using a convolutional neural network (CNN) to estimate the angle of lumbar oblique images. Since there are no existing lumbar oblique images with known angles, we aimed to generate synthetic lumbar X-ray images at arbitrary angles from computed tomography (CT) images and to estimate the angles of these images using a trained CNN. Methods: Synthetic lumbar spine X-ray images were created from CT images of 174 individuals by rotating the lumbar spine from 0° to 60° in 5° increments. A line connecting the center of the spinal canal and the spinous process was used as the baseline to define the shooting angle of the synthetic X-ray images based on how much they were tilted from the baseline. These images were divided into five subsets and trained using ResNet50, a CNN for image classification, implementing 5-fold cross-validation. The models were trained for angle estimation regression and image classification into 13 classes at 5° increments from 0° to 60°. For model evaluation, mean squared error (MSE), root mean squared error (RMSE), and the correlation coefficient (r) were calculated for regression analysis, and the area under the curve (AUC) was calculated for classification. Results: In the regression analysis for angles from 0° to 60°, the MSE was 14.833 degree2, the RMSE was 3.820 degrees, and r was 0.981. The average AUC for the 13-class classification was 0.953. Conclusion: The CNN developed in this study was able to estimate the angle of an lumbar oblique image with high accuracy, suggesting its usefulness.

Echocardiography Based Cardiac Ischemic Detection Using Red-CNN Classifier

One of the most vital and hardest-working organs of the human body is the Heart. Nevertheless, a condition termed Cardiac Ischemia or CAD is engendered by the inadequate supply of blood along with oxygen to the heart muscle. So, with the aid of a Regularisation Dropout-centered Convolutional Neural Network (ReD-CNN) classifier, an efficient CAD detection system is proposed. At first, the input videos and the data are amassed from the Echonet Dynamic dataset. Next, frame conversion is undergone by the input video. For further processing, keyframes are extracted and preprocessed after frame conversion. Afterward, by means of a Contraction Expansion-Residual Network (CE-ResNet), the heart chambers are segmented, and then the features are extracted. Simultaneously, utilizing the Feynman Kan Formalism-based Tissue Doppler Imaging (FKF-TDI) approach, wall motion is estimated. Meanwhile, the features are extracted from the data and grouped via Average Distance-centric Fuzzy C Means (AD-FCM). After that, mapping of the features extracted from the frames and the grouped features occurs and the resultant data is divided into training, testing, along with validation stages. Then, utilizing the Cosine Similarity-centered Circulatory System Based Optimization (2(CS)BO) methodology, the Feature Selection (FS) is done. Therefore, to compute the Ischemic index, the features that are selected and the estimated wall motions are wielded. Lastly, for effective classification, the Ischemic index and the selected features are fed into the ReD-CNN classifier. Finally, to ascertain the superiority of this technique, the proposed system’s performance is contrasted with the prevailing methodologies.